Skip to main content
SNHUCourse Prerequisites
Tools

EG409Composite Materials

Course Prerequisites ToolSNHU EG409 has 3 direct prerequisites, with 17 courses in its complete prerequisite tree.

Undergraduate · 3 credits

This is an introductory course on the theoretical and practical design, analysis, and fabrication of polymer matrix composites. The course starts with an overview of composite materials and related manufacturing methods. As a baseline, the behavior of uni-directional composites is addressed, including stiffness and strength prediction methods. The topic of short fiber composites is also covered with an emphasis on load transfer mechanics and property averaging. The analysis of orthotropic laminas includes stress-strain relations, prediction of engineering constants, and transformation matrices. Finally, Lamination Theory is covered as a means to design and analyze laminated composite structures with the introduction of failure theories. The course is supported by a significant laboratory component where the students fabricate and mechanically test various composite material systems for comparison of measured properties to theoretical predictions. A Design Project, involving both computer code implementation of Lamination Theory, design and analysis of a composite component, and fabrication and evaluation of the composite component, is the capstone of the course.

Prerequisite Tree

  • EG325 — Mechanics of Materials II
    • MAT350 — Applied Linear Algebra
      • MAT225 — Calculus I: Single-Variable Calculus
        • MAT142 — Precalculus with Limits
        • MAT140 — Precalculus
          • MAT136 — Introduction to Quantitative Analysis
    • EG208 — Materials Science
      • PHY215 — Physics I
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
      • CHM120 — General Chemistry I
      • MAT225 — Calculus I: Single-Variable Calculus
        • MAT142 — Precalculus with Limits
        • MAT140 — Precalculus
          • MAT136 — Introduction to Quantitative Analysis
    • EG202 — Mechanics of Materials I
      • MAT275 — Calculus II: Integration and Series
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
      • EG200 — Statics
        • ETE200 — Fundamentals of Statics
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
        • PHY215 — Physics I
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
      • EG208 — Materials Science
        • PHY215 — Physics I
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
        • CHM120 — General Chemistry I
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
      • ETE202 — Strength of Materials
        • EG200 — Statics
          • ETE200 — Fundamentals of Statics
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
            • PHY215 — Physics I
              • MAT225 — Calculus I: Single-Variable Calculus
                • MAT142 — Precalculus with Limits
                • MAT140 — Precalculus
                  • MAT136 — Introduction to Quantitative Analysis
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
        • EG208 — Materials Science
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
          • CHM120 — General Chemistry I
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
        • MAT275 — Calculus II: Integration and Series
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
        • ETE200 — Fundamentals of Statics
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
          • EG200 — Statics
            • PHY215 — Physics I
              • MAT225 — Calculus I: Single-Variable Calculus
                • MAT142 — Precalculus with Limits
                • MAT140 — Precalculus
                  • MAT136 — Introduction to Quantitative Analysis
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
  • EG326 — Aircraft Structures
    • MAT325 — Calculus III: Multivariable Calculus
      • MAT275 — Calculus II: Integration and Series
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
    • MAT330 — Differential Equations
      • MAT275 — Calculus II: Integration and Series
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
      • MAT350 — Applied Linear Algebra
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
    • EG202 — Mechanics of Materials I
      • MAT275 — Calculus II: Integration and Series
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
      • EG200 — Statics
        • ETE200 — Fundamentals of Statics
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
        • PHY215 — Physics I
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
      • EG208 — Materials Science
        • PHY215 — Physics I
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
        • CHM120 — General Chemistry I
        • MAT225 — Calculus I: Single-Variable Calculus
          • MAT142 — Precalculus with Limits
          • MAT140 — Precalculus
            • MAT136 — Introduction to Quantitative Analysis
      • ETE202 — Strength of Materials
        • EG200 — Statics
          • ETE200 — Fundamentals of Statics
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
            • PHY215 — Physics I
              • MAT225 — Calculus I: Single-Variable Calculus
                • MAT142 — Precalculus with Limits
                • MAT140 — Precalculus
                  • MAT136 — Introduction to Quantitative Analysis
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
        • EG208 — Materials Science
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
          • CHM120 — General Chemistry I
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
        • MAT275 — Calculus II: Integration and Series
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
        • ETE200 — Fundamentals of Statics
          • MAT225 — Calculus I: Single-Variable Calculus
            • MAT142 — Precalculus with Limits
            • MAT140 — Precalculus
              • MAT136 — Introduction to Quantitative Analysis
          • EG200 — Statics
            • PHY215 — Physics I
              • MAT225 — Calculus I: Single-Variable Calculus
                • MAT142 — Precalculus with Limits
                • MAT140 — Precalculus
                  • MAT136 — Introduction to Quantitative Analysis
          • PHY215 — Physics I
            • MAT225 — Calculus I: Single-Variable Calculus
              • MAT142 — Precalculus with Limits
              • MAT140 — Precalculus
                • MAT136 — Introduction to Quantitative Analysis
  • MAT330 — Differential Equations
    • MAT275 — Calculus II: Integration and Series
      • MAT225 — Calculus I: Single-Variable Calculus
        • MAT142 — Precalculus with Limits
        • MAT140 — Precalculus
          • MAT136 — Introduction to Quantitative Analysis
    • MAT350 — Applied Linear Algebra
      • MAT225 — Calculus I: Single-Variable Calculus
        • MAT142 — Precalculus with Limits
        • MAT140 — Precalculus
          • MAT136 — Introduction to Quantitative Analysis

Interactive Prerequisite Graph

Explore the prerequisite relationships visually. The graph below supplements the crawlable list above.

React Flow

Unofficial — For Informational Purposes Only

This site is unofficial and is intended for informational purposes only. Course requirements, transfer evaluations, catalog rules, and program requirements can change. Always confirm your academic plan with your SNHU advisor for official guidance.